|
|
|
|
|
|
|
|
Air Plasma Cutting Machinery For Machinery, Chemical Machinery, Metallurgy, and Other Industrial Fields Introduction Air plasma cutting has been applied in machinery, chemical machinery, metallurgy, and other industrial fields.It is widely used because it can cut all kinds of metals, its cutting speed is high, and the kerfs are narrow, straight, and smooth.However, typical plasma cutters lack the cutting performance needed by many. Our Technology Our new air plasma cutting machines have been developed to eliminate this shortcoming.Our cutting machines have very powerful cutting ability; they can cut carbon-steel, stainless steel, copper and its alloy, aluminum and its alloy, and refactory alloys with high melting points.
Plasma Cutting Performance The present cutting machines have very powerful cutting ability, they can cut carbon-steel, stainless steel, copper and its alloy, aluminum and its alloy, and refractory alloys with high melting points. Our machines can give high quality cut kerfs are straighter and smoother. The angles of kerf surfaces are 90 degrees +/- 5 degrees, and there are almost no melted dregs adhering to the bottom of the kerfs.The cut surface finish is usually less than 0.2mm. Our machines can achieve a cuttable thickness of 200 mm for steel and aluminum. This Technology is Available for Transfer TOP THREE RELATED SITES Auto Regulating Arc WeldingHigh Power CO2 Lasers YAG Laser Texturing Machine
|
|
|
Contact CTC:
China-America Technology Corp. TEL: +1-212-650-5606
Marshak Science Bldg., Rm. J423 FAX: +1-212-650-5608
138th St. at Convent Ave.
New York, NY 10031
ctc@chinatech.com
